Graco SnugRide Click Connect 40 Owner's Manual page 36

4. If the head support position must be
adjusted: remove child from child restraint
and adjust head support by doing the following:
A. Press button on front of child restraint and
pull the harness to loosen
B. Reach back to head support height adjustment
handle
adjustment buttons as shown.
C. Move up or down and lock into one of the
head support height positions
For smaller babies, shorten head support by
placing the bottom of the flap under support as
shown
and squeeze the red head support
.
.
.
36
REAR OF SEAT