Graco SnugRide Click Connect 40 Owner's Manual page 31

8. NEVER put two LATCH connectors on one
vehicle LATCH anchor
9. Test child restraint for secure installation as
described in child restraint "Final Safety
Check" page 41.
10. Check that the LATCH stays tight and does not
slip from the tightened position. If it does not stay
tight, try another seating position or contact
Graco at 1-800-345-4109.
11. To remove LATCH, release the
tension on the LATCH connector
by pushing button in as shown
12. Press button on LATCH
13. Pull out (away from anchor point).
14. Repeat steps 12 and 13 for other
connector.
.
.
.
.
31