Viewing The Dhcp Client List Page - Belkin G Wireless router User Manual

Using the Web-based advanced User interface
sections
table of contents
5. lease time
The length of time the DHCP server will reserve the iP address for each
computer� We recommend that you leave the lease time set to "Forever"�
The default setting is "Forever", meaning that any time a computer is
assigned an iP address by the DHCP server, the iP address will not
change for that particular computer� setting lease times for shorter
intervals such as one day or one hour frees iP addresses after the
specified period of time� This also means that a particular computer's
iP address may change over time� if you have set any of the other
advanced features of the router such as DMZ or client iP filters, these
are dependent on the iP address� For this reason, you will not want the iP
address to change�
6. local Domain name
The default setting is "Belkin"� You can set a local domain name (network
name) for your network� There is no need to change this setting unless
you have a specific advanced need to do so� You can name the network
anything you want such as "MY NeTWOrK"�
g Wireless router
1 2 3 4 5 6

Viewing the DHCP Client List Page

You can view a list of the computers (known as clients), which are
connected to your network� You are able to view the iP address of the
computer, the host name (if the computer has been assigned one), and
the MAC address of the computer's network interface card (NiC)� Pressing
the "refresh" button will update the list� if there have been any changes,
the list will be updated�
45
7 8 9 10