INTRODUCTION Product Description The Russound RM691 High-Effi ciency Indoor/Outdoor on the bracket so you don’t have to hold the speaker in Loudspeaker is designed to provide high acoustic output place while securing it. The bracket and speaker have with low amplifi er power. This makes it perfectly suited knurls for secure alignment to the desired angle.
fi re resistance rating for the application. Check the local building code for specifi c 1. Gently pull off the speaker grille, making sure not to requirements. Russound offers 2- and 4-conductor distort it. speaker cables with a Class 3 fi re rating for in-wall installation.
INSTALLATION Installation on a hollow wall Installing the Mounting Bracket 1. Once you have determined roughly where to mount The RM691 can be installed horizontally or vertically. the speakers, use a stud fi nder to locate the wall For a horizontal installation, install the mounting brack- studs and mark their location.
INSTALLATION Connecting the Speaker 1. Strip 1 to 2 inches (2.5 to 5 cm) off the end of the 4. Check to make sure there are no stray strands of wire cable jacket. Then strip ½ inch (1.3 cm) of insulation outside the terminals.
INSTALLATION Connecting the Amplifi ed Keypad or Taking Care of Your Speakers Amplifi er Your speakers are made of durable materials that need very little care. All we recommend is an occasional 1. Make sure the keypad or amplifi er is turned off. wiping with a soft, damp cloth.
To return for repairs, the speaker must be shipped to Russound at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the speaker in a cor- rugated container with at least 3 inches of resilient material to protect the speaker from damage in transit.
Need help?
Do you have a question about the Ratio RM691 and is the answer not in the manual?
Questions and answers