Omega Skyline Relaxation Operation Manual page 6

OPEN the cover of remote panel
; Power Switch
I Heat Switch
' Select Full Body Heat On/Off
. Air Massage Intensity
Select Program I, II, or III.
Air Massage Intensity
Select Program I , II, III or Off.
. ... . .. Note:Thei
Vibration Massage Programs will cause
Select Program I , II, III or Off. music by electro'magrieflc
interference Thus, please
i Vibration Locations
: Select Program I, II or III.
do not play music when
operating vibration ;
program. :
vibration
electromagnetic interference.
i Lumbar Massage Program
: Select the program On/Off.
; Lumbar Massage Intensity
; Select Program I, II, or III.
; Down - Chair Back & Leg Rest
i Push to recline the chair back and raise the leg rest, i
I Up - Chair Back & Leg Rest
; Push to incline the chair back and lower the leg rest. \ e to Use the Uni t
Ensure there is adequate space for reclining.
Approx. 66 inches
Keep at least
4 inches
Keep at least
4 inches
Mats
CAUTION
• Do not use the unit in an area with high humidity, such as the bathroom, as this can lead to
electric shock or other accident.
• Place the unit on a completely leveled surface. Failure to do so may cause the lounger to tip over,
leading to accidents.
• Do not use the massage lounger in direct sunlight or in place where it will be exposed to high
temperatures, such as in front of a heater, as this can cause discoloration or hardening of this
upholstery.
• Place the unit on a mat to prevent floor damage.