JVC D-ILA G1000 Instructions Manual page 40

Operating the Main Menu (Cont.)
Adjusting Picture Quality (Cont.)
Remote control unit
OPERATE COMPUTER VIDEO
T
VOL. ZOOM
W
MENU/ENTER
PAGE
BACK
PRESET
QUICK
ALIGN.
PAGE BACK button
Submenu items
[PICTURE menu]
( N T S C ( 4 8 0 i ) )
B R I G H T N E S S
C O N T R A S T
S H A R P N E S S
C O L O R
T I N T
A L L R E S E T
Notes
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
• Adjustment items (on the PICTURE menu) are different when
AV signals are input and when computer-related signals are
input.
40
G1000[D] p.34-45
MENU/ENTER
button
FOCUS
Cursor buttons
AV
MUTING
P I C T U R E
0
0
3
– 3
1
40
5 Make adjustment with the cursor
button 2 or 3.
For video system input
• To adjust multiple items, repeat steps 4 and 5.
• To reset all items (to factory-set adjustment values "0"), select
ALL RESET with the cursor buttons and press the MENU/
ENTER button.
• To reset only the selected items (ALL RESET excluded) to
the factory-set adjustment value, press the remote control's
PRESET button. The selected item is reset to the factory-set
adjustment value.
Adjustment item Button
2
BRIGHTNESS
3
2
CONTRAST
3
2
SHARPNESS
3
2
COLOR
3
2
TINT
3
MENU/
ALL RESET
ENTER
Notes
• The adjustment item, TINT, is displayed only for NTSC system. It is not
displayed (cannot be adjusted) when PAL or SECAM system signals are
input.
• When video signals are input to the COMPUTER IN-2 terminal, adjustment
items "COLOR" and "TINT" are indicated but cannot be adjusted.
For computer system input
• To adjust multiple items, repeat steps 4 and 5.
• To reset all items (to factory-set adjustment values "0"), select
ALL RESET with the cursor buttons and press the MENU/ENTER
button.
• To reset only the selected items (ALL RESET excluded) to the
factory-set adjustment value, press the remote control's PRESET
button. The selected item is reset to the factory-set adjustment
value.
99.2.24, 5:51 PM
Adjustment content
Gets darker.
(–30 ← 0 ← +30)
Gets brighter.
(–30 → 0 → +30)
Gets lower.
(–30 ← 0 ← +30)
Gets higher.
(–30 → 0 → +30)
Gets softer.
(0 ← 7)
Gets sharper.
(0 → 7)
Gets softer.
(–30 ← 0 ← +30)
Gets deeper.
(–30 → 0 → +30)
Gets reddish.
(–30 ← 0 ← +30)
Gets greenish.
(–30 → 0 → +30)
Resets all adjustment values of
items on the PICTURE menu to
the factory-set values (0).
(To be continued on the next page)