Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MJX F47
Summary of Contents for MJX F47
- Page 1 ITEM NO.F47/F647...
-
Page 2: Safety Guidelines
Thank you for purchasing this product. Please read this manual carefully before use and retain it for future reference. Technical parameter of the helicopter Fuselage Length:235MM Gross Weight: about 49g Main Rotor Diameter: 225MM Overall height: 80MM Battery: Li-polymer 3.7V Motor: N30 Gear Ratio: 8:1 Tail Rotor Diameter: 50MM... - Page 3 Product/spare parts included in this packaging Qty(pc) Qty(pc) Description Description Helicopter 3.7V 380mAh li-polymer battery Remote controller Manual Tail Rotor Rotor blade USB charger The LCD Remote controller Main features of the remote controller 2.4G, LCD reomote control, scores of helicopters can be played at the same time.
- Page 4 Function switch Function description In stick Mod 3 and 4, it helps to tune the helicopter's sideward flight. Trimmer B In stick Mod 1 and 2,it helps to tune the helicopter's left and right direction turning speed. In stick Mod 3 and 4, it helps to tune the helicopter's left and right direction turning speed.
-
Page 5: Flight Mode Selection
键 键 Pic.1 Pic.2 键 键 Activate the LCD remote controller EXIT/ EXIT/ LIGHT LIGHT MENU/ MENU/ Slide the power switch to "ON" position after throttle control stick selection PUSH PUSH is done.To activate the remote controller, slowly push up the throttle control 键... - Page 6 STICK MOD STICK MOD STICK MOD This is the low speed icon. This is the medium speed icon. This is the maximum speed icon . EXIT/ EXIT/ EXIT/ Pic.7 Pic.8 Pic.9 LIGHT LIGHT LIGHT MENU/ MENU/ MENU/ PUSH PUSH PUSH The helicopter connector stabilizer bar...
- Page 7 Preparation for flight Turn on the remote control. To activate the remote controller,slowly push up the throttle stick to the top and then push it down to the bottom. The remote controller is activated once you hear a beep sound.Then, the indicator light flashes rapidly while the remote controller is sending out connectional signal.
- Page 8 A.When the helicopter is hovering but still keeping flying forward automatically, the elevator servo connecting bar please take out the elevator servo connecting bar, then, clockwise rotate swashplate the bar for one circle(360°). How many the aileron servo circle should be regulated will depend coneecting bar on the tilt angle of the swashplate.
- Page 9 Trimmer Functions If the helicopter keeps moving forward/backward even there is no control signal given, users may adjust the elevator trim to keep the helicopter 键 键 balanced. STICK MOD 1 or 3: If the helicopter keeps moving backward, push up Trimmer A 键...
- Page 10 键 键 STICK MOD 1 or 2: 键 键 If the helicopter keeps moving leftward, turn right of Trimmer C until it gains balance. EXIT/ LIGHT MENU/ If the helicopter keeps moving PUSH righttward, turn left of Trimmer C until it gains balance. If the helicopter keeps spinning even there is no control signal given, EXIT/ LIGHT...
-
Page 11: Troubleshooting
Push down the throttle control stick, the rotation speed of the mains rotors Downward are decreasing and the helicopter descends accordingly. Turn the left/right turning control stick Turn left to the left,the helicopter will left. Turn the left/right turning control stick Turn right to the right,the helicopter will right.
Need help?
Do you have a question about the F47 and is the answer not in the manual?
Questions and answers