/backward. Forward/backward and sideward flight controlled by swashplate, the helicopter is strong enough for outdoor free flight. Equipped with screw servo,F39/F639 has the characteristics of light weight, easy operation and rapid response. Safety Guidelines This product is not a toy.
Page 4
Product/spare parts included in this packaging Qty(pc) Qty(pc) Description Description Helicopter Adaptor Remote controller Manual Rotor blade The LCD Remote controller Main features of the remote controller Microcomputer control LCD remote controller ,with the 2.4G auto connection technology, many helicopters can be operated simultaneously with high stability.
Page 5
Function switch Function description In stick Mod 2 and 3, it helps to tune the helicopter's sideward flight. Trimmer B In stick Mod 1 and 4,it helps to tune the helicopter's left and right direction turning speed. In stick Mod 2 and 3, it helps to tune the helicopter's left and right direction turning speed.
Page 6
stick to the top and then push it down to the bottom. The remote controller is activated once a beep sound is heard. Then, the indicator light keeps flashing while the remote controller is sending out connectional signal. It takes about 10 seconds to finish the signal transmission process. After signal transmission is completed, the indicator light keeps constant "on”.
Page 7
clockwise or counterclockwise of the MENU/OK button.Press MENU/OK button to stop the blinking of RUDD icon and enter into the left/right turning speed setting interface.Turn clockwise of the MENU/OK button to increase the left/right turning speed and turn counter clockwise of the MENU/OK button to decrease the left/right turning speed.Press MENU/OK button to store the setting or Press EXIT/LIGHT button to cancel the setting.
Page 8
Transmitter battery low power prompt When the power of the transmitter is weak, the battery power icon will keep blinking and send out beep sound to remind user to change new battery. The helicopter connector stabilizer bar rotor blade servo split charging device searchlight battery connector...
Preparation for flight Insert the battery plug into the helicopter battery socket located at the right side of the helicopter, then, the indicator light of the helicopter will keep flashing rapidly, set the helicopter down to a platform. Slide the power switch to “ON” position. To activate the remote controller,slowly push up the throttle stick to the top and then push it down to the bottom.
Page 10
Swash Platform of the swash Servo Parallel connector Extension line of the helicopter Pic7 Pic8 Trimmer Functions If the helicopter keeps moving forward/backward even there is no control signal given, users may adjust the elevator trim to keep the helicopter balanced.
Page 11
If the helicopter keeps moving righttward, turn left of Trimmer B until it gains balance. STICK MOD 1 or 4: If the helicopter keeps moving leftward, turn right of Trimmer C until it gains balance. If the helicopter keeps moving righttward, turn left of Trimmer C until it gains balance.
Page 12
Rightward flight rightward. Video function and videography device If installed the C4001 videography device(should be ordered separately from MJX), the helicopter has the videography function. TF memory card card reader videography module Videography device...
How to install the videography device Insert the TF memory card into the videography module.(Pic9) Fix the videography module onto the bottom of the helicopter by screws.(Pic10) Open the helicopter nose and insert the plug of the videography module into the video control socket, then, reinstall the helicopter nose.(Pic11) Pic9 Pic10 Pic11...
Page 14
MJX F39 Shuttle Описание Характеристики...
Need help?
Do you have a question about the F39 Shuttle and is the answer not in the manual?
Questions and answers