Functions Of The Operator Panel; Adf Type - Fujitsu fi-6670 Getting Started Manual

■ Model-Common Parts
Ultrasonic Sensor (x2)
(for multifile detection)
Sheet Guide (x2)

Functions of the Operator Panel

The Operator Panel is comprised of a Function Number Display, buttons, and LEDs, which are used to
operate the scanner and to check the scanner status.
For information on how to configure settings for scanning using the [Scan/Stop] or [Send to] button,
refer to the help topics the TWAIN scanner driver contained in the Setup DVD-ROM, or the section
"Using the Scanner Buttons to Start A Scan Quickly" in the Operator's Guide.

■ ADF type

Two Operator Panels are mounted on the scanner; one each on each side. You can use
whichever is convenient for you.They can be folded back in place when they are not used. The
scanner status can be checked while the Operator Panels are folded back in place.
Pick Arm (x1)
Glass (x2)
Pick Roller (1 x 2 types) (consumable)
Check
When the Operator Panel
is folded back in place
Brake Roller (x1) (consumable)
Brake Roller Holder (x1)
Function Number Display
[Function] button
Function
Scan / Stop
Power
[Power] button/Power LED
Send to
[Scan/Stop] button
[Send to] button
Check LED
LED
Lights in green when the scanner is ON.
Lights in orange when an error occurs.
11
Feed Roller (x4)
Plastic Roller (x4)
Chute Roller (x1)
(Usually covered with a hood)
Pick Roller Cover (x1)