Getting Started - Oricom AM900 User Manual

Getting Started

Connecting your Oricom AM900
Example of Connecting the System
Connect to a phone
wall socket.
Existing corded or
cordless phone (not
supplied)
Depending on the type of phone and phone wall socket you have you may
need to purchase a different type of telephone line adaptor plug. These
are available from electronics stores.
Warning. Use only the AC adaptor supplied with this product. Incorrect
adaptor polarity or voltage can seriously damage the AM900 and or be
dangerous.
AC adaptor part number #: S005CS0900030, Input: 100-240V, 50/60
Hz, Output: DC9V 300mA
1. Plug the AC adaptor into a power point.
2. Plug the small plug on the AC adaptor into the socket on the rear of
the answering system.
3. After initialisation, the display will show 00 on the message counter.
Setting the day, time and Language
The answering system always saves the day of the week and the time of
day with each recorded message so that you always know when callers
left their messages however the time and day must be set correctly.
If you want to enter the day, time and language for the first time or if you want to
change a day and time that has already been set, please proceed as follows:
1. Press and hold the SKIP button for 2 seconds. You will hear the day of
the week.
2. Press the SKIP button repeatedly until you hear the correct day of the
week.
6
Adaptor plug (supplied)
Modular line cord not supplied.