Table of Contents
Advertisement
Installation of Host Computer and
Overview
This chapter provides information on setting up and installing the computer and
other peripheral components in a OpScan iNSIGHT 70 scanner standalone or
network configuration. Installation information on optional equipment, such as a
system printer and/or Bar Code Reader, is also provided.
Begin by unpacking the computer, the monitor, and the keyboard. Unpack other
equipment as required. Refer to the manufacturer's user manuals for installation
instructions and assistance when performing the procedures discussed on the
following pages.
Caution: The monitor and printer power cords should be plugged into AC wall outlets or a
power strip located outside the scanner.
There may be situations where you are installing additional OpScan iNSIGHT 70
scanners, additional peripheral equipment, or printers and you need to power the
system down. In this case, you should use the following shutdown procedures.
•
Hold down the ALT key and press F4. The following menu is displayed.
•
Highlight the Shut down option.
•
Click OK.
Chapter 3
Peripherals
3-1
Advertisement
Table of Contents
