Table of Contents
Advertisement
Hardware Description
Accton's Cheetah Wireless-3501C USB Adapter
supports an 11 Mbps half-duplex connection to Ethernet
networks. This adapter is fully compliant with 2.4 GHz
DSSS CSMA/CA wireless networking as defined in IEEE
802.11b. It can be installed in any notebook or desktop
with a USB port. Support is provided for Windows
98/Me/2000/XP.
LED Indicator
The Cheetah Wireless-3501C USB Adapter includes an
LED indicator, as described in the following table.
Status
Description
On
Power is being supplied to the adapter.
Flashing
Adapter is receiving or transmitting data via a wireless connection.
Multi-choice Mounting Clip
The WN3501C USB adapter is supplied with a multi-choice mounting clip. The clip may
be slipped onto a belt or other convenient location. Magnets and velcro may also be
attached to the clip for mounting in a variety of locations.
Hardware Installation
Attaching the Clip (Optional)
1.
Slide the open end of the clip under the two lips (at the USB port end) in the square
slot at the rear of the WN3501C.
Lips
Lug Slots
Lugs
3
Advertisement
Table of Contents
