Other Features; Set Alarm Timer; Set Sleep Timer; Listen Through Headphone - Philips MCD2010 User Manual

8 Other features

Set alarm timer

This unit can be used as an alarm clock. You can
select DISC, TUNER or USB as alarm source.
Note
•
Make sure that you have set the time correctly.
1
In standby mode, press and hold
SLEEP/TIMER for three seconds
» [TIMER SET](timer set) scrolls on the
display.
» [SELECT SOURCE] (select source)
scrolls on the screen.
2
Press SOURCE repeatedly to select a
source: DISC, USB, TUNER.
3
Press SLEEP/TIMER to confirm.
» The hour digits are displayed and begin
to blink.
4
Press / repeatedly to set hour, then
press SLEEP/TIMER again to confirm.
» The minute digits are displayed and
begin to blink.
5
Press / to set minute, then press
SLEEP/TIMER to confirm.
» VOL (volume) is displayed and begins
to blink.
6
Press / to adjust volume, then press
SLEEP/TIMER to confirm.
» is displayed.
» To deactivate alarm timer, press
SLEEP/TIMER again.
Note
•
Alarm timer is not available in MP3 LINK
mode.
•
If DISC/USB source is selected and the
track cannot be played, tuner is activated
automatically.
22 EN

Set sleep timer

1
When the unit is turned on, press
SLEEP/TIMER repeatedly to select a time
period (in minutes).
» When sleep timer is activated,
displayed.
» To deactivate sleep timer, press
SLEEP/TIMER again until

Listen through headphone

Plug a headphone into the
Listen to external audio
device
You can listen to an external audio device such
as MP3 player through this unit.
1
Connect the MP3 link cable to:
the MP3 LINK socket
•
• the audio output jack (usually
headphone jack) of the external
device.
2
Select MP3 LINK source.
3
Play the device.
is
disappears.
socket.