Sony LMD-4251TD Specifications page 4

Marker settings
LMD-51 Series monitors can display various area markers,
including a center marker, aspect markers, and safety
area marker. The brightness of these markers can be
selected from three different levels: white, gray, and dark
gray.
Users can also select either a black or gray mat to fill the
outer area of the aspect markers. These flexible marker
controls, together with the choice of many different
aspect markers, make the LMD-51 Series monitors
extremely convenient display devices for a variety of
shooting scenarios, from standard video acquisition to
digital cinematography.
Marker settings
16:9 Mode
Aspect Marker 4:3, 15:9, 14:9, 13:9, 1.85:1,
2.35:1, 1.85:1 & 4:3
Center Marker Yes
Safety Area 80%, 85%, 88%, 90%, 93%
VESA mounting
LMD-51 Series monitors provide VESA standard mounting
holes which support installation on a wall or ceiling:
LMD-4251TD – 400 x 400 mm pitch
LMD-2451TD – 100 x 100 mm pitch
4
Standard and optional signal interfaces
In addition to the standard input interfaces of analog
composite, component and RGB, and Y/C (S-Video),
LMD-51 Series monitors are equipped with two slots for
optional input adaptors of any combination for SD or HD
video inputs including 3G/HD-SDI. Users can expand the
input capability according to their budget and needs.
Computer signal interfaces
LMD-51 Series monitors are equipped with standard
interfaces for HD-15 and DVI-D interfaces, respectively.
4:3 Mode
16:9
LMD-2451TD option slots
Other features
• Multi-display mode
• H/V Delay Function
• ACC Off
• DC Operation 24 V: LMD-2451TD
• Setup Level for Analog Component and NTSC signal
• Sub Control on Contrast, Chroma, Phase, and Brightness
• Blue-Only Mode
• Monochrome Mode
• Auto Chroma / Phase Setup
• Three-color Tally (LMD-4251TD is not equipped with Tally)
• Key-inhibit function
• Smart APA (Auto Pixel Alignment) for Computer Input
Signal-interface Options
BKM-250TG, 3G/HD/SD-SDI Input Adaptor*
• 3G/HD/SD-SDI signal input (x2)
• 3G/HD/SD-SDI monitor output (x2)
* 3G-SDI, HD-SDI and SD-SDI signals are detected
automatically
BKM-243HS, HD-SDI/SD-SDI Input Adaptor*
• HD-SDI/SD-SDI signal input (x2)
• HD-SDI/SD-SDI monitor output (x1)
* HD-SDI and SD-SDI signals are detected automatically
BKM-227W, NTSC/PAL Input Adaptor
• Composite input/output (x1)
• Y/C input/output (x1)
BKM-244CC,
HD/SD-SDI Closed Caption Adaptor*
• HD-SDI/SD-SDI signal input (x2)
• HD-SDI/SD-SDI monitor output (x1)
* HD-SDI and SD-SDI signals are detected automatically
* Closed-caption decoders (EIA 608 and EIA 708) are
equipped
BKM-229X, Analog Component Adaptor
• RGB,Y/P /P input (x1)
B R
• EXT SYNC (x1)
BKM-220D, SD-SDI 4:2:2 Input Adaptor
• SD-SDI signal input (x2)
• SD-SDI monitor output (x1)