The port forwarding process may vary depending on the brand and model number of the router
being used. Port forwarding of a router is required to allow user access to your network device.
Regardless of the Motorola router being used, the process of port forwarding is similar. You
will need to enable the ports by locating the port range forwarding screen. The set up instruc-
tion outlined below is an example of port forwarding a Motorola Router using Motorola Model
SBG 1000.
Step 1:
Open your web browser.
Enter the router IP address 192.168.0.1 in the address bar as shown below, followed by pressing
Enter.
http://192.168.0.1
http://192.168.0.1
http://192.168.0.1
Step 2:
Enter 'admin' in the User ID and 'motorola' in the Password dialog box followed by clicking 'Log
In' to enter the Motorola configuration page.
Page 28
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries