Advertisement
port forwarding – LinKSyS wired router
Step 5:
In the Application column enter a description of your network device (e.g. monitor)
In the Start entry field enter the first number of the port you need to port forward (e.g. 5000)
In the End entry field enter the last number of the port you need to port forward (e.g5003)
In the Protocol field, select Both.
In the IP address field, enter the computer network IP address you recorded previously during the Quick
Set Up Guide process.
Enable the system by checking the enabled box.
Select the Save settings button located at the bottom of the page to save your changes.
Port forwarding is now complete! Return to the quick set up guide and proceed with the rest of
the installation process.
Page 14
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries
reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2006 LOREX. All rights reserved.
A Guide to Port Forwarding Your Router
WWW.LOREXCCTV.COM
Advertisement
