Edit Mode > Group (Pad) - M-Audio Axiom Pro User Manual

|
Control Assignment List page 2
Type Control Type
Master Pan
Master Pan
Coarse Tune
Coarse Tune
Fine Tune
Fine Tune
Chorus Mod rate
Chorus Mod Depth
Feedback
Send to Reverb
Pitch Bend
Pitch Bend
Kybd. Velocity
Kybd. Velocity
Pad Velocity
Pad Velocity
Control Type Key
= Pads Group
= Numerical Keypad Group, Sustain Pedal, Function Keys,
Transport Controls
* NOTE: This column only describes the "non-standard" parameters and their associated sub-parameters within Axiom Pro (such as "Note OnOff Toggle" or "Rel. Bin Offset"). Standardized MIDI parameters (such as Continuous Controllers "CC" or "Master Volume") are not described in this
guide. If you require more information, please note that standard MIDI parameters are well documented on the Internet as well as in a number books about the MIDI protocol. To learn more about these standard parameters, please refer to one of these books or websites.
MIDI Ch. Param. A
- Min (0-127)
- LSB (0-127)
- Min (0-127)
- LSB (0-127)
- Min (0-127)
- LSB (0-127)
- Value (0-127)
- Value (0-127)
- Level (0-127)
- Level (0-127)
1-16, Zone 1-4, Group, Global Min (0-127)
1-16, Zone 1-4, Group, Global LSB (0-127)
- Min (0-127)
- Velocity (0-127)
- Min (0-127)
- Velocity (0-127)
= Encoders Group
= Slider Group, Pitch Bend, Keyboard Aftertouch, Modulation
Wheel, Expression Input
Param B Param C Param D
Max (0-127) - Entry (DEC, HEX)
MSB (0-127) - Entry (DEC, HEX)
Max (0-127) - Entry (DEC, HEX)
MSB (0-127) - Entry (DEC, HEX)
Max (0-127) - Entry (DEC, HEX)
MSB (0-127) - Entry (DEC, HEX)
- - Entry (DEC, HEX)
- - Entry (DEC, HEX)
- - Entry (DEC, HEX)
- - Entry (DEC, HEX)
Max (0-127) - Entry (DEC, HEX)
MSB (0-127) - Entry (DEC, HEX)
Max (0-127) - Entry (DEC, HEX)
- - Entry (DEC, HEX)
Max (0-127) - Entry (DEC, HEX)
- - Entry (DEC, HEX)
Description*
This parameter functions similarly to the fixed velocity setting found on the
Edit Mode > Global page. However, this parameter lets your selected control
determine the velocity of the keys in real-time (e.g. during a performance).
This parameter functions similarly to the fixed velocity setting found on the
Edit Mode > Global page. However, this parameter lets your selected control
determine the velocity of the keys in real-time (e.g. during a performance).
This parameter functions similarly to the fixed velocity setting found on the
Edit Mode > Group (Pads) page. However, this parameter lets your selected control
determine the velocity of the drum pads in real-time (e.g. during a performance).
This parameter functions similarly to the fixed velocity setting found on the
Edit Mode > Group (Pads) page. However, this parameter lets your selected control
determine the velocity of the drum pads in real-time (e.g. during a performance).