Installing The Microphone Unit; Appendix - Kenwood KDC-X996 Quick Start Manual

Installing the
Microphone unit
1. Check the installation position of the
microphone (accessory 5).
2. Remove oil and other dirt from the
installation surface.
3. Install the microphone.
4. Lay the cable up to the unit with it
secured at several positions using tape or
the like.
⁄
Install the microphone as far as possible
from the cell-phone.
5
Accessory
Fix a cable with a commercial item of tape.
Peel off the release coated
paper of double-face adhe-
sive tape to secure the
microphone on the place
shown above.
Turn the microphone
toward the driver.

Appendix

About Audio file
Playable Audio files
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)
Playable disc media
CD-R/RW/ROM
Playable disc file formats
ISO 9660 Level 1/2, Joliet, Romeo, Long
file name.
Playable USB devices
USB mass storage class
Playable USB device file systems
FAT16, FAT32
The online manual about
audio files is put on the site,
www.kenwood.com/cs/ce/audiofile/.
iPod/iPhone that can be connected
to this unit
Made for
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod with video
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
For information on the compatibility with
iPod/iPhone software, visit www.kenwood.
com/cs/ce/ipod/.
English | 15