Download Print this page
Tripp Lite BCPERS300 Specification Sheet
Tripp Lite BCPERS300 Specification Sheet

Tripp Lite BCPERS300 Specification Sheet

Bc personal 300va tower standby 120v ups
Hide thumbs Also See for BCPERS300:

Advertisement

Quick Links

BC Personal 300VA Tower Standby 120V UPS
MODEL NUMBER: BCPERS300
Description
Tripp Lite's BCPERS300 standby UPS offers AC surge suppression and long lasting battery support for desktop PCs, network workstations and a wide variety
of consumer and electronic devices. Uninterruptible Power Supply / UPS circuits switch to battery backup mode within milliseconds to keep connected
equipment running without interruption or data loss during power failures, brownouts and overvoltages. AC surge suppression prevents connected equipment
damage.
Features
BCPERS300 small tower 120V standby UPS offers AC power protection from blackouts, brownouts, overvoltages and transient surges
300VA / 180 watt UPS output capacity
Uninterruptible Power Supply / UPS operation maintains battery-derived AC output during blackouts, brownouts and overvoltages to prevent data loss
and system downtime for connected equipment
6.3 minutes runtime at 100% load (180 watts), 16.8 minutes runtime at 50% load (90 watts)
17 minutes runtime for a desktop computer system consuming 80 watts continuous
3 built-in NEMA 5-15R UPS supported outlets
NEMA 5-15P input connection with 6ft / 1.8m line cord
Network grade AC surge and lightning protection is available from all outlets
Front panel LEDs indicate line mode and battery mode status
Hot swappable user battery replacement
Optional PDUB15 bypass PDU enable hot-swappable UPS replacement with no disruption to connected equipment
Small tower housing supports desk or floor placement

Specifications

OUTPUT
Output Volt Amp Capacity (VA)
Output Watt Capacity (watts)
300
180
1 / 4
Highlights
300VA tower 120V standby UPS
Maintains AC output during power
failures
NEMA 5-15P input plug and 3
NEMA 5-15R outlets
Package Includes
BCPERS300 UPS System
Instruction manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the BCPERS300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Tripp Lite BCPERS300

  • Page 1: Specifications

    Description Tripp Lite's BCPERS300 standby UPS offers AC surge suppression and long lasting battery support for desktop PCs, network workstations and a wide variety of consumer and electronic devices. Uninterruptible Power Supply / UPS circuits switch to battery backup mode within milliseconds to keep connected equipment running without interruption or data loss during power failures, brownouts and overvoltages.
  • Page 2 Nominal Output Voltage(s) 115V; 120V Supported Frequency compatibility 60 Hz Output voltage regulation (Battery 115V (+/- 5%) mode) Built-in UPS output receptacles 3 5-15R outlet(s) Hot-Swap PDU options PDUB15 (2U / 8 5-15R outlets) Output AC waveform (AC mode) Sine wave Output AC waveform (battery mode) PWM sine wave INPUT...
  • Page 3 PHYSICAL Installation form factors supported Tower with included accessories Installation form factors supported Wallmount (UPSWM - tower mounting kit) with optional accessories Primary form factor Tower UPS / Power Module dimensions in primary form factor (height x width x 8.5 x 4.2 x 5.5 depth / inches) UPS / Power Module dimensions in primary form factor (height x width x...
  • Page 4 © 2014 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.