Manual Configuration; Dynamic (Cable) - D-Link DIR-615 User Manual

Secton  - Configuraton
If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select
your Internet type and enter the correct configuration parameters.
Select your Internet connection type using the "My.Internet.Connection.
is" drop-down menu.
Click the Save. Settings button when you have configured the
connection.
My Internet Select Dynamic.IP.(DHCP) to obtain IP Address information automatically
Connection:
from your ISP. Select this option if your ISP does not give you any IP
numbers to use. This option is commonly used for cable modem services
such as Comcast and Cox.
Enable
Advanced Domain Name System (DNS) services enhances your Internet
Advanced
performance by getting you the information and web pages you are looking
DNS Service:
for faster and more reliably. In addition, it improves your overall Internet
experience by correcting many common typo mistakes automatically, taking
you where you intended to go and saving you valuable time.
Disclaimer: D-Link makes no warranty as to the availability, reliability,
functionality and operation of the Advanced DNS service or its features.
Host Name:
The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure.
Use
Check the box if you are having problems obtaining an IP address from your ISP.
Unicasting:
Enter the Primary and secondary DNS server IP addresses assigned by your ISP. These addresses are usually obtained
Primary/
automatically from your ISP. Leave at 0.0.0.0 if you did not specifically receive these from your ISP.
Secondary
DNS Server:
D-Lnk DIR-615 User Manual

Manual Configuration

Dynamic (Cable)

1