Motherboard Installation - Thermaltake VE1000SWA Manual

3.1 Motherboard Installation

Each motherboard has different standoff layout. It is highly
suggested that you refer to your motherboard's manual when
installing motherboard into the Case. The cases are applicable with
Standard ATX and Micro ATX motherboards.
Your motherboard may require a special I/O Panel, which should be
included with your motherboard.
Placement Direction:
When installing the motherboard, make sure you follow the direction
provided by your motherboard manufacturer. On most standard
motherboards, the edge with external ports goes to the rear part of the
chassis. It is highly recommended that you install CPU, heat sink and
modular components before fixing the motherboard inside the chassis.
This side towards
the rear of the
chassis
Above illustration is a sample of what
the motherboard's layout. For more
detail screw hole placement, please
refer to your motherboard manual.
11
= the locations of
the screw holes. Note
these locations and
place included
standoffs on the chassis
first.
How to open the front panel
1
2
Open the both side panels,
find out the 6 springs which
are circled in the pictures.
Push every spring to
release the front panel.
12