1080 Lcd Unit - Lenovo M30-70 Hardware Maintenance Manual

Lenovo M30-70 Hardware Maintenance Manual

1080 LCD unit

For access, remove these FRUs in order:
• "1010 Battery pack" on page 32
• "1020 Hard disk drive" on page 34
• "1030 DIMM" on page 36
• "1040 PCI Express Mini Card for wireless LAN/WAN" on page 37
• "1050 Fan assembly and Heat Sink assembly" on page 39
• "1060 Keyboard" on page 41
• "1070 System board" on page 43
Figure 8. Removal steps of LCD unit
Remove three screws
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
• Make sure that the LCD connector is attached firmly and make sure that you
46
a
a
a
Step Screw (quantity)
a
M2 × 2 mm, flat-head, nylok-coated (1)
M2.5 × 5 mm, flat-head, nylok-coated
(3)
make sure that they are not subjected to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
b
and screw .
a
b
Color Torque P/N
Black 1.85 kgfcm 90202856
Black 3.0 kgfcm