1080 Lcd Unit - Lenovo IdeaPad U330p Hardware Maintenance Manual

Hide thumbs Also See for IdeaPad U330p:
Table of Contents

Advertisement

Lenovo IdeaPad U330p/U330 Touch/U430p/U430 Touch

1080 LCD unit

For access, remove these FRUs in order:
• "1010 Battery pack" on page 34
• "1030 Hard disk drive" on page 39
• "1040 DIMM" on page 42
• "1050 PCI Express Mini Card for wireless LAN/WAN" on page 44
• "1060 Fan assembly and Heat Sink assembly" on page 46
• "1070 System board" on page 49
Figure 8. Removal steps of LCD unit
Remove four screws
Step
Screw (quantity)
a
M2.5 × 4.0 mm, flat-head, nylok-coated
(4) (U330p/U330 Touch)
M2.5 × 5.0 mm, flat-head, nylok-coated
(4) (U430p/U430 Touch)
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
• Make sure that the LCD connector is attached firmly and make sure that you
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
a
.
a
a
a a
Color
Torque
Silver
2.5±0.2 kgfcm
Black
2.5±0.2 kgfcm
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ideapad u330 touchU430pIdeapad u430 touchIdeapad u430p

Table of Contents