Writing And Editing Text - Gigaset C300 User Manual

Base power consumption
In standby mode*
Base in standby mode ** < 0.4 W
During a call
*) Charged handset in base
**) Handset not in base
General specifications DECT
DECT standard
GAP standard
No. of channels
Radio frequency range 1880–1900 MHz
Duplex method
Repeat frequency of
the transmission pulse
Length of the transmis-
sion pulse
Channel grid
Bit rate
Modulation
Language code
Transmission power
Range
Base power supply
Environmental condi-
tions in operation
Dialling mode
C300/ C300A/
CS310 CS310A
approx. approx.
0.7 W 0.7 W
< 0.4 W
approx. approx.
0.5 W 0.5 W
Is supported
Is supported
60 duplex channels
Time multiplex,
10 ms frame length
100 Hz
370 μs
1728 kHz
1152 kbit/s
GFSK
32 kbit/s
10 mW, average power
per channel
250 mW pulse power
up to 300 m outdoors,
up to 50 m indoors
230 V ~/50 Hz
+5°C to +45°C, 20% to
75% relative humidity
DTMF (tone dialling)/
PD (pulse dialling)
Pin connections on the telephone
jack
3
2
1

Writing and editing text

The following rules apply when writing text:
u Multiple letters and characters are
assigned to each key between Q and
O as well as * and #.
u Control the cursor with u v t s.
u Characters are inserted at the cursor posi-
tion.
u Press the display key
character to the left of the cursor.
u The first letter of the name of directory
entries is automatically capitalised and
followed by lower case letters.
Setting upper/lower case or digits
Repeatedly press the hash key # to change
the text input mode.
123 Writing digits
Abc Upper case *
abc Lower case
* First letter in capitals, all others in lower case
When the mode is switched, the active
mode is indicated at the bottom left of the
screen.
Appendix
1 unused
4
2 unused
5
3 a
6
4 b
5 unused
6 unused
§Del.§
to delete the
61