Advertisement
QuickSpecs
Configuration Instructions - HP StoreAll 8800 Storage
Step 4: Select ENT SAS Expansion Capacity Block (minimum 0, maximum 6)
ENT SAS Expansion Capacity Blocks are optional and provide additional SFF 10K ENT SAS HDD capacity. A maximum of three can be
added to each ENT SAS Capacity Block (H6Z70A or H6Z71A).
NOTE: ENT SAS Expansion Capacity Blocks must use the same HDD as the ENT SAS Capacity Block to which they are attached.
HP StoreAll 8800 11TB w/25 450GB SFF 10K ENT SAS HDD 6G Expansion Capacity Block
Includes 25 450GB 10K SFF ENT SAS HDDs in a 2U rack mount enclosure; usable capacity at the file system level is
approximately 7.8 TiB
HP StoreAll 8800 22TB w/25 900GB SFF 10K ENT SAS HDD 6G Expansion Capacity Block
Includes 25 900GB 10K SFF ENT SAS HDDs in a 2U rack mount enclosure; usable capacity at the file system level is
approximately 15.6 TiB
Step 5: Choose system options
The following options are available:
Drive Bundles for MDL SAS Partial Capacity Blocks
MDL SAS HDD Bundles are optional and provide additional LFF 7.2K MDL SAS HDD capacity for MDL SAS Partial
Capacity Blocks. A maximum of one can be added to each MDL SAS Partial Capacity Block (H6Z61A, H6Z62A, and
H6Z63A).
NOTE: MDL SAS HDD Bundles must use the same HDD as the MDL SAS Partial Capacity Block in which they are to be
installed.
HP StoreAll 8800 2TB LFF 7.2K MDL SAS HDD Bundle
Includes 34 2TB 7.2K LFF MDL SAS HDDs for installation in HP StoreAll 8800 2TB LFF 7.2K MDL SAS HDD 6Gb Partial
Capacity Block (H6Z61A)
HP StoreAll 8800 3TB LFF 7.2K MDL SAS HDD Bundle
Includes 34 3TB 7.2K LFF MDL SAS HDDs for installation in HP StoreAll 8800 3TB LFF 7.2K MDL SAS HDD 6Gb Partial
Capacity Block (H6Z62A)
HP StoreAll 8800 4TB LFF 7.2K MDL SAS HDD Bundle
Includes 34 4TB 7.2K LFF MDL SAS HDDs for installation in HP StoreAll 8800 4TB LFF 7.2K MDL SAS HDD 6Gb Partial
Capacity Block (H6Z63A)
Fibre Channel HBA for backup offload
Backup traffic can be offloaded from the cluster and client network to a Fibre Channel SAN using an HBA. A maximum of one add-in
Fibre Channel HBA is supported per Node for this purpose only.
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
Rack
The default rack for HP StoreAll 8800 Storage in HP configuration tools is an HP 642 Intelligent Series Rack. A KVM Console and KVM
Switch will be automatically added when factory rack integration is selected.
HP StoreAll 8800 Storage is also supported in existing racks containing HP StoreAll 9320 Storage and in the HP StoreAll 9730 Storage
Base Rack (QZ728A). When installed alongside HP StoreAll 9730 Storage in an HP StoreAll 9730 Storage Base Rack, the HP StoreAll
DA - 14792 Worldwide — Version 2 — May 9, 2014
HP StoreAll 8000 Storage
Page 7
E7W08A
E7W09A
H6Z67A
H6Z68A
H6Z69A
AJ764A
Advertisement
