Advertisement
QuickSpecs
Configuration Instructions - HP StoreAll 8200 Gateway Storage
HP BladeSystem c-Class Small Form-Factor Pluggable 3m 10GbE Copper Cable
HP BladeSystem c-Class Small Form-Factor Pluggable 7m 10GbE Copper Cable
Step 3: Choose system options
The following options are available:
Fibre Channel HBA for backup offload
Backup traffic can be offloaded from the cluster and client network to a Fibre Channel SAN using an HBA. A maximum of one
add-in Fibre Channel HBA is supported per Node for this purpose only.
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
Rack
The default rack for HP StoreAll 8200 Gateway Storage in HP configuration tools is an HP 642 Intelligent Series Rack. A KVM Console
and KVM Switch will be automatically added when factory rack integration is selected. HP StoreAll 8200 Gateway Storage is also
support in 42U standard and extended racks, 36U racks, and 22U racks.
NOTE: Factory rack integration should be selected unless a plan has been established to integrate HP StoreAll 8200 Gateway Storage
into an existing facility rack.
Network Switch for Rack
The cluster and client network required for the HP StoreAll 8200 Gateway Storage Nodes can either use available facility switches, HP
StoreAll Storage dedicated switches installed within the Rack, or a combination of the two. The components below are recommended
for an HP StoreAll Storage dedicated cluster and client 10GbE network installed within the Rack.
Network Switch
Select one or two HP 5920-24XG Switches per Rack. Two Switches are recommended to avoid a single point of failure. Select two fans
per Switch. Select one or two power supplies per Switch. Two power supplies per Switch are recommended for redundancy.
HP 5920AF-24XG Switch
HP 5920AF-24XG Front (port-side) to Back (power-side) Airflow Fan Tray
HP A58x0AF 650W AC Power Supply
Connection of 10GbE Network Controller ports to the Network Switch
Optical fiber cables are recommended for the best airflow and are easier to route than copper cables. Select four HP BladeSystem c-
Class 10Gb Short Range Small Form-Factor Pluggable Options for each Node to connect the Node to the Switch(es), eight total per pair
of Nodes. Select the same number of HP X130 10G SFP+ LC SR Transceivers for the corresponding ports in the
HP 5920AF-24XG Switch and the same number of HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cables.
HP BladeSystem c-Class 10Gb Short Range Small Form-Factor Pluggable Option
HP X130 10G SFP+ LC SR Transceiver
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
Connection of the Integrated Lights-Out port to the Network Switch
Select one HP X120 1G SFP RJ45 Transceiver per Node for the corresponding Switch ports, two total per pair of Nodes. Select the same
number of HP RJ45 to RJ45 Cat5e Black M/M 7.6m 1-pack Data Cables.
HP X120 1G SFP RJ45 T Transceiver
HP RJ45 to RJ45 Cat5e Black M/M 7.6m 1-pack Data Cable
DA - 14792 Worldwide — Version 2 — May 9, 2014
HP StoreAll 8000 Storage
487655-B21
487658-B21
455883-B21
Page 14
AJ764A
JG296A
JG298A
JC680A
JD092B
QK733A
JD089B
C7535A
Advertisement
