Honda TRX300EX Owner's Manual page 179

If You Have a Flat Tire
Emergency Wheel Removal/Installation
Refer to Saf ety Precautions
(1) wheel nuts
Removal
1. Park your ATV on a firm, level surface.
2. Raise the front (or rear) wheels off the ground and place a support
block under the vehicle.
3. Remove the wheel nuts ( ).
4. Remove the wheel.
Avoid getting grease, oil, or dirt on the disc or pad surfaces when
removing and installing each wheel. Any contamination can cause
poor brake performance or rapid pad wear after reassembly.
Taking Care of the Unexpected
170
on page
(1)
1
75 .
(1)
(2)
(2) wheel rim