Other Connections; Stb Connection To A Standard Stereo System - Magnavox TB100MW9 Owner's Manual

STB Connection to a Standard Stereo System

Supplied cables used in this connection are as follows:
RF cable x1
•
Please purchase the rest of the necessary cables at your local store.
Before connecting, ensure the AC power cords of all devices are NOT connected to the AC outlets.
1 Refer to "Connecting an Antenna" on page 9 to connect the STB to an antenna.
2 Refer to "Connecting to TV" on page 10 to connect the STB and the TV.
3 Use a standard audio cable to connect the AUDIO OUT jacks on the STB to the audio input jacks on the
stereo component.
4 Plug all AC power cords into AC outlets, then turn all devices on.
5 Set the stereo to the input mode to which you connected the audio from the STB.
Refer to your stereo's manual for details.
X6040UD_Book.indb 11 X6040UD_Book.indb 11
AUDIO OUT VIDEO
R L OUT
Audio cable
To audio input jacks (L, R)

OTHER CONNECTIONS

Rear panel of STB
ANT. IN ANT. ΟUΤ
STEREO COMPONENT
11
EN
1A23
10/22/2007 5:09:13 PM 10/22/2007 5:09:13 PM