Haier HRD-2714CS User Manual page 4

SETTING UP
PLACE ON FIRM,
LEVELED FLOOR
If the floor is uneven, adjust the
screw type supports at the
bottom of the refrigerator till
perfectly straight, as mentioned
earlier
CHOOSE A WELL-
VENTILATED SPACE
Provide sufficient wall clearance
on all sides with a minimum of
10 cm. on each side.
10 cm
10 cm 10 cm
Caution
Keep Ventilation openings, in the
appliance enclosure clear of
obstruction.
AVOID DIRECT SUN LIGHT
& HEAT
1
PLACE THE REFRIGERATOR
CLOSE TO AN ELECTRIC
PLUG POINT
Avoid using extension cords. Also
keep the power cord rolled up and
off the floor.
3
USE A THREE-PIN SOCKET
OUTLET
Make sure that the socket you
are plugging your refrigerator in
to has proper earthing.
Improper earthing can cause
electric shocks and could also
damage the appliance.
10 cm
5
DO NOT INSTALL NEAR
DAMP PLACES
Dampness and droughts will
impair the efficiency of insulation
in the appliance.
2
2
4
6