Advertisement
cleaning various Parts oF Your Warmer draWer
Before cleaning any part of the appliance, be sure the control is turned OFF and the warmer drawer is COOL. REMOVE
SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANING WILL REDUCE THE NUMBER OF
MAjOR CLEANING LATER.
surfaces
Plastic
stainless steel
Porcelain enamel
Warmer Drawer Rack
care & cleaning
How to clean
To remove control knob, turn to the OFF position; grasp firmly and pull straight off the
shaft. Clean with a cloth soaked in soapy water. Rinse with a clean water and a dishcloth.
To replace knob after cleaning, line up the flat sides of both the knob and the shaft;
then push the knob into place. note: Humidity controller knob cannot be removed .
Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water
and a cloth. do not use cleaners with high concentrations of chlorides or
chlorines. Do not use harsh scrubbing cleaners. Only use kitchen cleaners that are
especially made for cleaning stainless steel. Always be sure to rinse the cleaners
from the surface as bluish stains may occur during heating that cannot be removed.
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a
1:1 solution of clear water and ammonia. If necessary, cover difficult spots with
an ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and
a damp cloth, and then scrub with a soap-filled scouring pad. Rinse and wipe dry
with a clean cloth or paper towel. Remove all cleaners or the porcelain may become
damaged during future heating. do not use spray oven cleaners on the cooktop.
The rack may be removed for cleaning. If removed, clean by using a mild, abrasive
cleaner following manufacturer's instructions. Rinse with clean water and dry.
(cleaning chart)
7
Hide quick links:
Advertisement
