Connecting Cables; 24Pin Atx Power (Atx_Pwr_24P) - EVGA Z97 Installation Manual

Connecting Cables

This section takes you through all the necessary connections on the
motherboard. This will include:
Power Connections

24pin ATX power (
EPS 8pin 12V power
Internal Headers

Front Panel connectors (power/reset/LED's)
Fan Headers (PWM for CPU and DC for )
USB 2.0 Header
USB 3.0 Header
Audio Header (FTW and Classified)
SATA III
Rear I/O Panel


24pin ATX Power (ATX_PWR_24P)

ATX_PWR_24p
right edge of the board. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the power
supply cable into the connector and make sure it is secure.
The 24pin Power Connector may be standard or right angled depending on
your motherboard model.
)
PW1
is the main power supply connector located along the lower
24pin Power Connector
- 6 -