Getting Started - Samsung 4000 SERIES User Manual

Getting Started

Accessories
• Remote Control & Batteries (AAA x 2)
• Warranty Card / Safety Guide
• Wire-Holder Stand
Input Cables (Sold Separately)
• RS232
• Audio
• HDMI
• HDMI-DVI
✎
Check the cable before plug-in
Cable
HDMI
USB
Optical
Do not plug cable upside down.
Be sure to check before plug-in.
TV Controller (Panel Key)
Power on Turns the TV on by pressing the controller in standby mode.
Adjusts the volume by moving the controller from side to
Adjusting the volume
side when the power is on.
Selects a channel by moving the controller up and down
Selecting a channel
when the power is on.
Press the controller when the power is on, then the function
Using the function menu menu screen appears. If you press it again, the function
menu screen disappears.
Selects the MEDIA.P by moving the controller in the
Selecting the Media Play function menu screen. The Media Play main screen
appears.
Selects the MENU(
Selecting the MENU ( ) function menu screen. The OSD(On Screen Display) of your
TV's feature appears.
Selecting the Source
Selects the Source List (
function menu screen. The Source List screen appears.
List ( )
Selects the Power Off (
Power Off ( )
controller in the function menu screen.
✎
Exits the menu when pressing the controller more than 1 second.
• Owner's Instructions
• Power Cord
• Component
• Composite (AV)
• Coaxial (RF)
Ports
Function menu
MEDIA.P
Return
TV Controller
Remote control sensor
) by moving the controller in the
) by moving the controller in the
) to turn the TV off by moving the
✎
When selecting the function by moving the controller to the up/down/left/
right directions, be sure not to press the controller. If you press it first, you
cannot operate it to move the up/down/left/right directions.
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of on-screen
prompts will assist in configuring basic settings. Press the
button. Plug & Play is available only when the Input source is set to
TV.
✎
Connecting the power cord and antenna. (refer to
'Connections')
Selecting a language
Plug & Play
Select Language of the OSD.
English
Español
Language
Français
Move
Selecting a Home Use mode
Plug & Play
Select 'Home Use' when installing this TV in your home.
Store Demo Home Use
Move
Selecting an antenna
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Auto
Move Enter
Setting the Clock Mode
Plug & Play
Set the Clock Mode.
Clock Mode : Auto
Enter
Viewing the HD Connection Guide
The connection method for the best HD screen quality is displayed.
ENTER
Press the button.
- 2 -
Select the desired OSD (On Screen
Display) language.
Enter
• Select the Home Use mode. Store
Demo mode is for retail environments.
• When pressing TV controller, the
function menu screen appears. Select
the MENU( ) and press it more than 5
seconds using the controller. The Store
Enter
Demo mode is set. Cancel the Store
Demo by selecting Source List(
and pressing it more than 5 seconds.
In Cable mode, you can select the correct
signal source among STD, HRC, and IRC
by pressing the , , or
Start
Start
Start
Skip
Set the Clock Mode automatically or
manually.
• If you select the Auto, set the
DST(Daylight Saving Time).
• On the DST screen, press
then select whether to turn DST
(Daylight Savings Time) on or off. Select
Skip the time zone where you live.
Enjoy your TV.
POWER
)
button.
ENTER ,