D-Link DIR-518L User Manual page 94

Section 4 - Configuration
Here, you can save or restore your router settings to and from a file. You can also reset your router to the factory default settings
and reboot the router.
Save Settings to Use this option to save the current router configuration
Local Hard Drive: settings to a file on the hard disk of the computer you are
using. First, click the Save.button. A file dialog will appear,
allowing you to select a location and file name for the
settings.
Load Settings Use this option to load previously saved router configuration
from Local Hard settings. First, click the Select.File button to find a previously
Drive: saved file of configuration settings. Then, click the Restore. .
Settings.From.File button to transfer those settings to the
router.
Reset to Factory This option will restore all configuration settings back to
Default Settings: the settings that were in effect at the time the router was
shipped from the factory. Any settings that have not been
saved will be lost, including any rules that you have created.
Clicking OK in the window will require you to reconnect to
this device using the default SSID and password.
Reboot Device: Click to reboot the router.
Note: Resetting your router here or via the RESET button will have the same
effect as Reset to Factory Default Settings.
D-Link DIR-518L User Manual
System
90