Sony DVP-NS67P Operating Instructions Manual page 20

Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an audio component, then press
ENTER.
If you did not connect an audio
component, select "NO," then go to step
13.
If you connected an audio component
using just an audio cord, select "YES:
LINE OUTPUT L/R (AUDIO)," then go
to step 13.
If you connected an audio component
using a digital coaxial cord, select "YES:
DIGITAL OUTPUT."
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your audio component.
If your audio component has a Dolby
Digital decoder, select "DOLBY
DIGITAL." Otherwise, select "D-PCM."
AUDIO SETUP
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
11
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
20
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
STANDARD
DOLBY SURROUND
D-PCM
D-PCM
DOLBY DIGITAL
STANDARD
DOLBY SURROUND
D-PCM
12
Press X/x to select whether or
not you wish to send a DTS signal
to your audio component.
If your audio component has a DTS
decoder, select "ON." Otherwise, select
"OFF."
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
ON
ON
OFF
OFF
ON