Crazy 8
ADJ Products, LLC - www.adj.com - Crazy 8 User Manual Page 10
System Menu
001
DMX Address
512
1 Chan
9 Chan
Channel Mode
12 Chan
15 Chan
21 Chan
Master
Slave Mode
Slave 1
Slave 2
Show 1
Show Mode
Show
4
Standard
Stage
Dimmer Mode
TV
Architec
Theatre
On
Sound Mode
Off
Blackout
Black Out
Hold
Show
On
Back Light
Off
No
Pan Invert
Yes
No
Tilt 1 Invert
Yes
No
Tilt 2 Invert
Yes
No
Lamp Flip
Yes
Auto Test
Temp. 1
Fixture Temp.
Temp. 2
Fixture Hours
Software Version
Reset
Crazy 8
System Menu: When making adjustments press ENTER to
confirm your setup then press and hold the MENU button
for at least 3 seconds. To exit without making any adjust-
ments press the MENU button. The display will lock after 30
seconds, press the MENU button for 3 seconds to unlock.
DMX Address
- Set the DMX Address -
1. Press the MENU button until "DMX Addresss" is displayed, press
ENTER.
2. "X" will now be displayed, "X" represents the displayed address.
Press the UP or DOWN buttons to find your desired address.
3. Press ENTER to confirm, and then press and hold the MENU button
for at least three seconds to assign.
Channel Mode
- This will let you select your desired
DMX Channel mode.
1. Press the MENU button until "Channel Mode" is displayed, press
ENTER.
2. "X Chan" will now be displayed, "X" represents the displayed DMX
channel mode. Press the UP or DOWN buttons to find your desired
Channel mode.
3. Press ENTER to confirm.
Slave Mode -
This will let you set unit as a master or
slave in a master/slave configuration.
1. Press the MENU button until "Slave Mode" is displayed, press
ENTER. Either "Master", "Slave 1" or "Slave 2" will be displayed.
2. Press the UP or DOWN buttons until your desired setting is dis-
played, then press ENTER to confim.
NOTE: In a Master/Slave configuration you can make one fixture the
Master and then set the next fixture to "Slave 2", the fixtures will now
have contrast movement to each other.
ADJ Products, LLC - www.adj.com - Crazy 8 User Manual Page 11
System Menu