Amlfm Tuner Operation - Dual XDVDN8190 Installation & Owner's Manual

• XDVDN8190 OPERATION
AM/FM Tuner Operation
AMIFM Tuner Mode From the main menu. touch TUNER icon to select AM/FM Tuner mode.
From the remote control or the front panel:
Press MODE until TUNER is displayed on the screen.
Band Touch
«1»
on the screen repeatedly until the desired band is displayed. FM-1.
FM-2. FM-3. or AM.
Press the BAND button to switch between bands. FM-1. FM-2. FM-3. AM.
From the remote control:
Press the BAND button.
Manual Tuning Touch
~
on the screen to tune to the next higher frequency step.
Touch .. on the screen to tune to the next lower frequency step.
Touch and hold either .. or
~
on the screen to continue tuning across
multiple stations.
From the remote control:
Touch .. or
~
to perform manual tuning.
Seek Tuning Touch
~
to tune to the next higher strong station.
Touch ... to tune to the next lower strong station.
From the remote control:
Press
~
to tune to the next higher strong station.
Press ... to tune to the next lower strong station.
Storing Presets There are 36 FM and 12 AM presets available in 4 bands.
After finding a frequency that you would like to store in memory. touch and hold
the screen on any of the frequencies in the preset station list until it turns yellow.
Auto Store Presets Touch and hold the
p!
icon to automatically program the 12 strongest stations
available into the presets in the current band.
Press and hold the
AS/PS
button for more than 2 seconds.
Preset Scan Touching the
p!
button will scan through aU tunable presets in the current
band and play them for 10 seconds each.
Press the
AS/PS
button momentarily.
31