Samsung 4000 Series User Manual page 182

❑ Switching between Anynet+ Devices
1. Press the TOOLS button, select
ENTERE
Select
2.
If you cannot find a device you want, press the
N
3. Select a device, and then press the ENTERE button. You can switch to the
selected device.
The
N
◀
to
●
●
List, and then press the ENTERE●button.
Device
menu appears only when you set
Device List
On in the System
Switching to the selected device may take up to 2 minutes. You
cannot cancel the operation during the switching operation.
If you have selected an Anynet+ device by pressing the SOURCE button
and then selecting its input source, you cannot use the Anynet+ function.
You must select and switch to an Anynet+ device by using the
for Anynet+ to work.
List
Anynet+ (HDMI-CEC), and then press
menu.
English
button to refresh the list.
C A B D
Anynet+ (HDMI-CEC)
▶
Device