Table of Contents
Advertisement
English
Getting the remote ready
1. Make sure your RC-35S2 remote and expansion
product are set to the same room code.
The remote you received is set to room code B.
If the expansion product is also set to room B,
you do not need to do anything.
To change the remote control room code, see
"Changing the room code" on page 8.
To change the room code in the expansion prod-
uct, see the owner's guide that came with it.
2. Make sure the house code in the RC-35S2 remote
is the same as in your L1FESTYLE® V25N35 home
entertainment system.
Both products are initially set to house code 15 and
should work together unless the house code in
your main system was changed. To change the
house code on the RC-35S2, see "Changing the
house code" on page 9.
Note:
For more information on changing the house code,
see "Adding Sound to Another Room
11
in the operating
guide for your LIFESTYLe" system.
EXPANDING YOUR
LlFESTYLE~
SYSTEM
Installing the remote batteries
1. Press and slide the battery cover off the back of
the remote.
Four AAA (lEG LR3)
batteries
2. Install the four supplied batteries, matching the
polarity markings
(+
and -) on the batteries to the
markings inside the battery compartment.
3. Slide the battery cover back into place until it
snaps closed.
3
Advertisement
Table of Contents
