Toshiba DVR670KU Owner's Manual page 101

Your setting is activated.
ON : Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS, set to "ON".
OFF : No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS, set to "OFF".
Your setting will be activated.
PCM :
Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to "PCM".
Stream : Outputs Dolby Digital signals.
When your amplifier/decoder is compatible
with Dolby Digital, set to "Stream".
lID
1 Settings for DTS (Default: ON)
--.J
Select a setting using [&
I
T],
then press [ENTER].
Your setting will be activated.
001
Settings for PCM (Default: 48kHz)
Use [&
I T]
to select a setting, then press [ENTER].
001
Dynamic Range Control (Default: ON)
Set to "ON" to compress the range between soft and loud sounds.
Use [&
I
T] to select a setting, then press [ENTER].
_~"i~.'~'''t:!t1rfi'!F'tfttr!tt*"it~rr1mii(t' ••
'"'.'ht'·W'tttfY'''ft i'il:?,ltwilltI1,t
nsft
trfi't
j " .
[1] [f]
Settings for Dolby Digital (Default: Stream)
Choose the appropriate audio setting for your external device.
Use La.
I T]
to select a setting, then press [ENTER].
It
will
only affect a disc playback.
Use La.
I
T] to select a desired item, then press [ENTER].
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select "48kHz". 96kHz sound
will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select "96kHz". 96kHz sound will
be output.
EN 101