Samsung Series 4 4000 User Manual page 8

When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the TV, press the POWER# button.
✎
Plug & Play is available only when the Source is set to TV.
✎
To return to the previous step in the Plug & Play sequence, press the red button on your remote.
1
Selecting the OSD
Language
2
Selecting the usage
mode
3 Setting the Clock
Mode
4
Selecting search
options for auto tuning
5
Selecting and
memorizing channels
6 Enjoy your TV.
If You Want to Reset Plug & Play...
"
MENU3 System Plug & Play
✎
To change the TV's settings from Store Demo to Home Use when not in Plug &Play, press the volume button on the
TV. When you see the volume in the OSD, press and hold
Plug & Play (Initial Setup)
Press the or button, and then press the
a language. Press ENTER when done.
Press the or button to select, and then press the ENTER
button.
y Select the Home Use mode. Store Demo mode is for retail
environments.
Press the or button. Press the
press ENTER.
✎
If you selected Auto, you'll select the time zone where you live next, and then select
whether to turn DST (Daylight Savings Time) On or Off.
✎
If you selected Manual, you'll use the number buttons or
date and time. Use the or
Press the or button to select Air or Cable, and then press ENTER. A check
appears on your selection. Select Next, and then press the ENTER button. You can
check both if you have both connected.
✎
If you selected Cable, you'll go to the Cable System screen. Use the
to select Digital or Analog, and then press ENTER. Use the
the correct cable signal format - STD, HRC, or IRC - and then press ENTER.
Most cable systems use STD. Select the correct cable signal format for both the
Digital and Analog systems. When done, select Search, and the press ENTER.
The channel search will start automatically. This can take up to 30 minutes.
For more information, refer to Channel
✎
Press the ENTER button at any time to interrupt the memorization process.
Press the ENTER button.
ENTER
MENU
(QJOLVK  
or button to select
or button to select Auto or Manual, and then
or
button to move between entry fields.
Auto Program in the e-Manual.
for 5 sec.
POWER
P
button to set the
or button
or button to select