Samsung Series 4 4000 User Manual page 185

Problem
I want to start
Anynet+.
I want to exit
Anynet+.
◀
●
Check if the Anynet+ device is properly connected to the TV
and check if the
System menu.
●
Press the TOOLS button to display the Anynet+ menu and
select a menu you want.
●
Select View TV
●
Press the SOURCE button on the TV remote control and select
a device other than an Anynet+ device.
●
Press > CH < and PRE-CH to change the TV mode. (Note
that the channel button operates only when a tuner-embedded
Anynet+ device is not connected.)
Possible Solution
Anynet+ (HDMI-CEC)
in the Anynet+ menu.
English
is set to On in the
▶