Asus WiFi-AP Solo User Manual page 28

5. Select the profile from the list
and click Next.
6. Setting up the TCP/IP for your
computer. In an Ad-hoc network,
you must manually specify IP
address for the WiFi-AP Solo™.
Make sure that the IP address
of the WiFi-AP Solo™ is within
the same subnet as that of the
other ad-hoc node (e.g. If the IP
address of the other Ad-hoc node
is 192.168.0.1, then the IP address
of WiFi-AP Solo™ must be
192.168.0.X, where X = 2 ~ 254).
When the setup is complete, click
Finish to quit the setup wizard.
3-12