Asus WiFi-AP Solo User Manual page 20

5. If you select Share-WEP or WPA-
PSK in Step 4, you are required to
input a password. You can choose
to configure the password in
either ASCII or HEX mode. If you
choose HEX mode, input 10 hex
digits for 64-bit encrytion, or 26
hex digits for 128-bit encryption.
Click Next to continue.
6. Select your Internet connection
and click Next.
7. The soft AP configuration is
complete. Record the setup
information on your note and
click Finish to quit the ASUS
WiFi-AP Solo™ wizard.
8. The default IP address of WiFi-AP
Solo™ is 192.168.0.1. To modify the
IP settings, double-click the wireless
network icon in the system tray ->
click Properties -> double-click
Internet Protocol (TCP/IP).
3-4