Auto Green - Gigabyte GA-990XA-UD3 User Manual

4-7

Auto Green

Auto Green is an easy-to-use tool that provides users with simple options to enable system power savings
via a Bluetooth cell phone. When the phone is out of the range of the computer's Bluetooth receiver, the sys-
tem will enter the speciied power saving mode.
• Device Scan Time (sec.):
Set the length of time Auto Green scans your Bluetooth cell phone key, ranging from 5 to 30 seconds in 5-second increment.
Auto Green searches for the key based on the length of time you set.
• Rescan Times:
Set how many times Auto Green will rescan your Bluetooth cell phone key if it does not detect it, ranging from 2 to 5 times. Auto
Green will keep rescanning according to the times you set. When the times limit is reached and your Bluetooth cell phone key
is still not detected, the system will enter the selected energy saving mode.
• Turn off HDD:
Set when to turn off the hard drive. If the system inactivity time exceeds the speciied time limit, the hard drive will be turned off.
(Note 1) If your cell phone has been conigured as the Auto Green key, you'll not be able to use it to connect to other
Bluetooth device(s) when Auto Green is enabled.
(Note 2) Whether the Bluetooth dongle is included depends on the motherboard models. Before installing the Bluetooth
dongle, be sure to turn off other Bluetooth receiver on your computer.
The Coniguration dialog box:
First, you have to set your Bluetooth cell phone as a portable key. On the Auto Green
main menu, click Conigure and then click Conigure BT devices. Select the Blu-
etooth cell phone that you want to use as the portable key
display your Bluetooth cell phone, click Refresh to let Auto Green re-detect the device.)
Before creating a Bluetooth cell phone key, make sure your motherboard
has a Bluetooth receiver and you have turned on the search and Bluetooth
functions on your phone.
Coniguring the Bluetooth cell phone key:
After you select a cell phone, the Add device as shown on the left will appear. Enter a
passkey (8~16 digits recommended) which will be used for pairing with the cell phone.
Then enter the same passkey on your cell phone.
Coniguring other Bluetooth settings:
On the Other Settings tab, you can set how much time it takes to scan your Bluetooth
cell phone key, how many times to rescan the key to make sure it is in range of your
computer, and when to turn off the hard drive if the system energy saving state lasts
over the predetermined period of time. After completing the settings, click Set for the
settings to take effect and then click Exit to quit.
Selecting a system energy saving mode:
Depending on your needs, select a system power saving mode on the Auto Green
main menu and click Save to save the settings.
Button Description
Standby Enters Power on Suspend mode
Suspend Enters Suspend to RAM mode
Disable Disables this function
The Bluetooth dongle included in the motherboard package
you to wake up the system from Suspend to RAM mode without the
need to press the power button irst.
- 73 -
(Note 1) . (If the screen doesn't
(Note 2) allows
Unique Features