Advertisement
How to use
Call waiting*
- Answer a second call without hanging up the first call by pressing the CALL button for 1
second (you will hear a beep). Press the CALL button for 1 second to turn to the
original call.
- Briefly press the CALL button to terminate the active call or both calls at once.
(subject to handset's support)
Call Reject*
- Press the CALL button for 1 second when the handset rings.
Calling Function
- Voice Dial and Last Number Redial features work with the Primary handset
(or handset which made the last outgoing call).
Enable / Disable Multipoint
- With the Power off, press and hold VOLUME UP and slide the Power Switch to the on
position for 2 seconds to power on as Multipoint enable.
- With the Power off, press and hold VOLUME DOWN and slide the Power Switch to the
on position for 2 seconds to power on as Multipoint disable.
Out of range
- Operating range up to 10 meters (approximately 33 ft)
- If the hands-free car kit and handset do not automatically reconnect when they are
back within the required range, briefly press the CALL button on the HFB-320 to
reconnect manually.
Note : if the HFB-320 and handset are out of range for approximately 60 minutes,
HFB-320 will automatically turn off, to help save power.
To activate the hands-free car kit, with the Power off, slide Power switch to the
on position.
* It is possible to use these functions only when your handset supports them. For further
information about using these features, please consult your handset's user manual.
6
LED indication
Function
HFB-320 Status
Operating
Power on
Power off
Pairing mode
headset / hands-free
profile connected
Call connected
Charging
Charging
Charging complete
Troubleshooting
Does not turn on
Check whether the battery
of the HFB-320 is fully
charged.
Unable to
Check whether
communicate with
the handset supports
®
the LG Bluetooth
the headset or hands-free
headset hands-free
Bluetooth profiles.
car kit HFB-320
Check whether the battery
of the HFB-320 is low.
Unable to pair the
Check and make sure the
HFB-320 with the
hands-free car kit is on.
Bluetooth
®
device
Check and make sure
the hands-free car kit
hold the PWR button for
is placed in pairing mode.
Low sound (speaker)
Check the speaker volume.
Action
The blue LED light flickers 4 times.
The blue LED light flickers 4 times
and then turns off.
The blue LED light stays on.
The blue LED light flickers
2 times every 5 seconds.
The blue LED light flickers
2 times every 5 seconds.
The blue LED stays on.
LED is turns off.
Charge the battery.
Determine whether your
handset supports
the headset or hands-free
Bluetooth profiles.
Charge the battery.
Slide the Power Switch
to the on position.
With the power off, press the
CALL Button and slide the
Power Switch to the on side at
the same time for 2 seconds to
manually place the hands-free
car kit in pairing mode.
lncrease the volume level.
7
Advertisement
