Canon Vixia mini X Instruction Manual page 271

Trouble?
Invalid port number. Perform the setting again.
- The port number entered cannot be used. In the settings for
the Monitor while Out function (A 183) change the port
number to a port that does not conflict with other devices.
IP address conflict
- Change the camcorder's IP address to avoid any conflict
with devices connected to the same network. Alternatively,
change the IP address of the conflicting device.
Memory card cover is open
- The memory card cover was opened while the memory card
was being accessed. Stop the Wi-Fi function in use and end
the Wi-Fi connection.
Multiple access points detected. Try the operation again.
- There are multiple access points sending out a WPS signal
at the same time. Try the operation again later or perform
setup using the [WPS: PIN Code] or [Search for Access
Points] option (A 207).
No access points found
- The access point set in the camcorder could not be found.
- Cordless phones, microwave ovens, refrigerators and other
appliances may interfere with the wireless signal. Try using
the camcorder in a location farther away from such appli-
ances.
- Make sure that you use the access point's SSID for the cam-
corder's Wi-Fi settings (A 211).
271