D-Link AirPremier N DAP-3690 Quick Install Manual page 6

Concurrent dual band outdoor poe access point

Hide thumbs Also See for AirPremier N DAP-3690:

Table of Contents

Outdoor PoE Access Point to Your Network

Hardware Installation Overview

Step 1:

Complete the Physical Installation first.

Step 2:

Connect the Ethernet (connected to the DAP-3690 in Step 1 on page 4) to

the P+ DATA OUT port on the PoE base unit.

Step 3:

Connect an Ethernet cable from a router/switch or PC to the DATA IN port on the

PoE base unit.

Step 4:

Attach the power adapter to the connector labeled POWER IN on the PoE

base unit. Attach the power cord to the power adapter into an electrical

outlet.

Step 5:

For the console cable requirements, please refer to "Physical Install:

Console Cable" on page 5 and connect the console cable to your laptop or PC.

Connecting the DAP-3690

D-Link DAP-3690 Quick Install Guide

Table of Contents