Sony Cyber-shot DSC-WX5 Instruction Manual page 125

Protect
Protects recorded images against accidental erasure.
The mark is displayed for registered images.
1 Press the
(Playback) button to switch to playback mode.
2 MENU t (Protect) t desired mode t z on the control button
(This Image)
(Multiple
Images)
Notes
• When the internal memory is used to record images, View Mode is set to Folder View and still images
and movies are displayed in the same folder.
• When [Display Burst Group] is set to [Display Main Image Only], only the main image in the burst group
is protected. If you want to protect all images, set [Display Burst Group] to [Display All] first, then apply
the protection (page 88).
z To cancel the protection
Select the image for which you want to cancel protection, and unlock it by pressing z on
the control button as the same procedure to protect it.
The indicator disappears, and the protection is released.
Protects the currently displayed image in single-image mode.
You can select and protect multiple images.
After step 2, perform the following.
1Select an image then press z.
Repeat the above step until there are no more images to be
protected. Select an image with a
mark.
2MENU t [OK] t z
mark to release the
91 GB