Full Bag Indicator - Bissell BG11 User Manual

M
aintenance and care
Installation/Removal of Vacuum Dirt Bag
1. Push on the front door latch to gain
access to the bag.
2. if removing a full bag, fold the ends of
the dust bag together and remove the
bag slowly. dispose of the bag.
3. if placing a new bag on, push bag onto
the hole opening as far as it will go.
fold the bag top down so you can close
front door.
4. door should latch properly if bag was
installed correctly. if door does not latch
securely check to make sure the bag is
secured properly.

Full Bag Indicator

1. at the top of the unit there is a red light
that will turn on when your vacuum bag
is to full capacity or if there vacuum air
flow is obstructed.
2. turn vacuum "off", unplug the vacuum
and then check to see if the vacuum bag
is full and needs to be replaced with a
new clean bag.
3. if the bag is not full check the hose for
clogs.
w w w . b i s s e l l c o m m e r c i a l . c o m 8 5 5 . 5 4 4 . 7 3 3 6
7