Hotpoint EG95 Instruction And Recipe Book page 19

Clock & Automatic Oven Timer Operation
b) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY
12
1
11
10 2
50
3
40 20
30
8 4
7 5
6
12
1
11
10
2
50
3
40 20
30
8 4
7
5
6
12
1
11
10 2
50
3
120
40 20
30
8 4
7 5
6
12
1
11
10 2
10
50
3
40 20
30
4
8
7 5
6
Step 1 Check that the correct time of day is set, if not follow instructions
for setting the time of day.
Step 2 Place food onto the correct shelf position in the oven and close the
A
oven door(s).
Step 3 Turn the upper knob (A) (without pulling), clockwise, until the
symbol appears in the display window.
B
This allows the auto function to be set.
A
Step 4 Set the orange / gold short finger to the "Start" time by pulling the
upper knob (A) and turning it clockwise.
e.g. 5 o'clock (as shown).
B
Note: The "Start Time" is the time of day you want the Auto
Cooking programme to start.
A
Step 4 Set the "Cook Period" by turning (without pulling) the upper knob
(A) clockwise, until the required cook period in minutes is
indicated in the display window.
B
e.g. 120 minutes (as shown).
Note: The "Cook Period" is the length of time that you wish the
food to cook, and it can be set for up to 180 minutes.
Step 5 Turn the oven control(s) to the required temperature, and if
necessary select the appropriate oven function.
Note: If an "Auto Cooking Programme" has been set the oven(s)
will ONLY operate during the pre-programmed times.
At the end of the Auto Cook Period the oven(s) will switch off
and a bell will ring for approximately 4 minutes.
Step 6 Return the oven controls to the OFF position.
A
Step 7 To cancel the Bell and return the timer to "Manual Operation",
turn (without pulling), upper knob (A) clockwise, until the
symbol is shown in the display window.
B
19